PETROCHEMICAL, OIL & GAS EQUIPMENT. STATIC AND ROTATING EQUIPMENT. | CONSTRUCTION AND AGRICULTURAL EQUIPMENT | ACCESSORIES AUXILIARY EQUIPMENT STATIC EQUIPMENT | CONSTRUCTION MATERIAL PRODUCTION LINES TURN-KEY PLANT SOLUTIONS ACCESSORIES AUXILIARY EQUIPMENT | ENTERTAINMENT AND AMUSEMENT EQUIPMENT | CHEMICAL PRODUCTS
Choke bean is often used in the positive choke valve for controlling the flow, our positive choke beans are similar as Cameron type H2 big john, body material: 410SS, lined with Tungsten Carbide or ceramic.
On one side of the choke manifold, calibrated choke beans are used to control flow rate through the fixed choke box. Each bean is a specific diameter, usually in increments of 1/64-inch, and is screwed into the choke box. These are the most common sizes (in inches) of choke beans used: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, 1, 1-1/4, and 1-1/2. Depending on the type of equipment used, the size of the choke bean can be as large as 3 inches.
1.Choke bean size: 4/64" ~ 192/64" increment with 1/64";
2.Both ceramic liner and tungsten carbide liner are all available;
3.Medium: oil and gas water, sand;
5.Tungsten carbide and ceramic choke bean are all available.
|Nominal Bore||1 13/16"- 7 1/16" (46mm - 180mm)|
|Working Pressure||2000 PSI – 20000 PSI|
|Working Temperature||Class LU (-46°C~121°C)|
|Working Medium||Oil, Natural gas, mud and gas containing H2S, CO2|
|Material Class||AA, BB, CC, DD, EE, FF, HH|
|Performance Requirement||PR1 – PR2|
|Specification Level||PSL1– PSL4|