Wuhan Huoshenshan Hospital - Another miracle of “Chinese speed”

Facing all the tight schedule and challenging tasks, it is a must-won battle with time to fight against the coronavirus. Construction workers are devoting themselves on-site to the competition with the Death.

Ways to ensure the operation quality of three-phase separator

The quality of natural gas and crude oil as well as the efficiency of gathering and transportation are all affected by the operation status of three-phase separator. In order to improve the operation quality of the equipment, the following

Effective separation method of oil/gas separation equipment

Oil/gas should be separated during the process of oil/gas gathering and transportation, which makes it necessary to use oil/gas separation equipment reasonably in order to improve the efficiency of separation.

How is the natural gas in oil wells separated?

After the gathering and transporting of the oil well production to the receiving station and the combined station, gas/liquid separation is generally performed first to release the natural gas in the oil well production for further liquid processing.

Water bath heater is the preferred heating equipment for oil/gas gathering and transportation

In the process of oil/gas gathering and transportation, heating equipment such as tube heater, water jacket heater, fire tube heater and organic heat carrier heater are usually used to heat crude oil and oily sewage.

HC horizontal three-phase separator brings ideal economic benefit to users

As the oil flows up the wellbore from the underground and along the gathering and transportation pipeline, the gas dissolved in the liquid phase continuously precipitated as the pressure drops and thus

Principle & Selection of Natural Gas Decarbonization Process

HC Petroleum Equipment has accumulated rich experience in natural gas processing, and is able to provide users with process equipment for gas field production and processing, flow control, oilfield facility control and metering, gas

Measures to solve tube plate corrosion of heat exchanger

During the manufacture of heat exchanger, the welding of tube plate and row tube is generally done by manual arc welding. There are different degrees of defects in the weld shape, such as depression, pores, slag inclusion, etc., and also